- 13 Aug 2024
- Print
- DarkLight
- PDF
LED Setting
- Updated on 13 Aug 2024
- Print
- DarkLight
- PDF
LED Setting on Card Reader Area
You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light.
To set it up, go to the Device > Light > LED Of Swiping Card Area interface.
Start Time- End Time (Hour): Enter the period for the LED lighting to be valid, e.g. if the period is from 18-22, it means the LED light will stay on from 6:00 pm to 10:00 pm during one day (24 hours).
LED White Light Setting
White light LED is mainly used to reinforce the lighting for the QR code access and for the greater visibility of the visitors when seeing their images from indoors in a dark environment.
To set it up, go to Device > Light > White Light interface.
Mode:
Auto: The white light will be turned on automatically for facial recognition and QR code scanning.
OFF: Disable the function.
Max White Light Value: Set the white light value from 1-5, and the default white light value is 3. The greater value it is, the brighter the light will be.
You can set up the backlight value on Setting > Display&Sounds > Backlight screen.
