Monitor Configuration
- 15 Dec 2023
- Print
- DarkLight
- PDF
Monitor Configuration
- Updated on 15 Dec 2023
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
See the Video Stream from Akuvox Door Phone
Add Third-party Camera on Indoor Monitors
On Akuvox indoor monitors, you can not only add Akuvox door phones to obtain live stream for monitoring and intercom previewing, but add third-party cameras to expand the monitoring range and see who is calling from multiple angles, which enhances security.
In this article, we take the indoor monitor C313 for example to show you the steps of adding third-party cameras.
Add Camera on the Device Web Interface
- Log into the device web interface. The default username and password are admin.
- Navigate to Phone > Monitor and configure the following parameters.
Note
- RTSP Address, Username, and Password are provided by third-party camera service provider.
- Routes vary by models.
- Device Number: Number the device.
- Device Name: Enter the desired device name to be displayed on the monitor screen and to be distinguished from other devices.
- Display in Call: Tick the box to display the live stream during a call.
- Click on Add.
The camera is added successfully.
Add Camera on the Device Screen
- On the device screen, go to More > Settings > Advance > Door Station. The default password to enter the advanced settings screen is 123456.
Note
- Routes vary by models.
- Press the Add icon on the upper right corner and configure relevant parameters.
- Device Name: Enter the desired device name to be displayed on the monitor screen and to be distinguished from other devices.
- Number: Number the device.
- Display in Call: Tick the box to display the live stream during a call.
- Press on the upper right corner. The camera is added successfully on the Door Station screen.
To see the live stream through the third-party camera, press Monitor on the device's home screen.
Tip
- If you want to see who is calling on the indoor monitor screen through the third-party camera, you need to configure intercom preview feature on the device web interface. Please read the article Configure Intercom Preview from Third-party Camera for detailed steps.
Was this article helpful?