Figure 2.6.1 shows the parameter setting interface for the "Event Group function," facilitating the configuration of up to 8 event groups. Each group, as shown in Figure 2.6.2, has 8 outputs.
Figure2.6.1: Event Group function interface
Figure2.6.2: Groupx - Output y function interface
Event Group x Function (x:1.. 8)
Enable event group x function.
Options:
Disable
Enable: When a specific group is enabled, the configuration parameters for its 8 outputs become visible.
All eight groups share the same function, with identical configurations for each group's 8 outputs. Here we use one of the outputs as an example.
Object type of Output y (y:1.. 8)
Defines the data type of output y in group x.
Options:
1bit
1byte
2byte
z->Trigger scene NO.[1.. 64,0=inactive] (z:1.. 8)
Specify the scene number that triggers output y in group x. Each output can configure up to 8 triggered scenes.
Options: 0 to 64, 0=inactive.
Object value of Output y [0 .. 1/0 .. 255/0 .. 65535]
Sets the output value. The value range is determined by the data type of output y:
1bit: 0 .. 1
1byte: 0 .. 255
2byte: 0 .. 65535
Delay time for sending [0 ..255]*0.1s
Set a delay before sending the output value to the bus.
Options: 0 .. 255