Personalize Your System

Prev Next

Connect to the Internet

You can modify the Wi-Fi network or connect the device to a local area network (LAN) anytime. Network changes may affect certain functions. To ensure proper operation, consult your service provider before modifying the network settings.

NOTE:

All panels within the family should be in the same local network to ensure the proper communication. To use SIP call and BelaHome app’s remote control function, the panels must be connected to the cloud and the Internet.

Change your Wi-Fi network

  1.  _data_code_DOWNLOAD_screen (1)Swipe down from the top edge of any screen to open Control Center, and tap > Wi-Fi.

  2. Choose the network you want to join.

  3. Enter the password if required, and tap  > Connect.

TIP:

You can tap in the upper right corner to view the HyPanel Plus’s IP address or toggle off DHCP to configure a static IP if needed.

screen_data_code_DOWNLOAD_screen - 2025-06-24T181059.727

Configure LAN network

To configure a LAN network:

  1. Swipe down from the top edge of any screen, and tap > Ethernet.

  2. On the Network view, do any of the following:

  • Toggle on DHCP feature, and the device will be assigned IP address automatically.

  • Toggle off DHCP feature, and enter IP Address, Sub-net Mask, Gateway, Preferred DNS Server, and Alternate DNS Server manually.

IMG_256

Configure network priority

You can set the preferred network when both Wi-Fi and Ethernet are connected.

To set up the priority, go to > Installer Settings > Network Priority Setting to choose which network the device should prioritize for communication.

_data_code_DOWNLOAD_screen - 2025-06-24T182000.317

TIP:

The default password for accessing the Installer Settings screen is 123456. After entering the Installer Settings, you may disable the lock password if required.

_data_code_DOWNLOAD_screen - 2026-02-12T183249.287

Put HyPanel Plus in standby mode

To put HyPanel Plus in standby mode quickly, swipe down from the top edge of any screen to open Control Center, then tap .

You can customize how long the device takes to enter the standby mode by tapping > Display > Go into Standby. For example, if you choose 1 min, then HyPanel Plus will enter standby mode in 1 minute of inactivity.

Change screen saver settings

In Display Settings, you can turn the screen saver on or off, and choose the screen saver style.  

  1. Swipe down from the top edge of any screen, then tap > Display.

screen (1)

  1. Do any of the following:

  • Turn on or off the the toggle next to Screen Saver On.

    When it is enabled, HyPanel Plus in standby mode will display photos and images; when disabled, the display just stays off.

  • Choose a screen saver style.

    Select Photo Wall from the pull-down menu if you want to play images.

To add your preferred photos, see here.

screen

  • Schedule the screensaver to turn on automatically by selecting Screen Saver Times.

NOTE:

When the panel is used in a GRMS project, any screensaver wallpapers sent from the GRMS system will override the default wallpapers on the panel. In addition, auto-brightness will be disabled automatically once the new wallpapers are applied.

Set up Do Not Disturb

To avoid interruptions from calls, messages, or notifications, enable Do Not Disturb(DND).

All calls and notifications will be silenced during the set period, while the alarm still rings.

Quickly Turn DND on or off

To quickly turn the DND feature on and set its duration, swipe down from the top edge of any screen, tap , then select the desired duration.

When DND is enabled, the icon will change accordingly. Tap the icon again to disable DND.

_data_code_DOWNLOAD_screen - 2026-02-12T183604.831_data_code_DOWNLOAD_screen - 2026-02-12T183507.249

NOTE:

If the DND period set here overlaps with a Specific Time DND, the effective DND period will be the combined duration of both settings.

Schedule the DND to turn on automatically

_data_code_DOWNLOAD_screen (3)

To schedule a DND to turn on automatically at certain times, do as the following:

  1. Swipe down from the top edge of any screen to open Control Center, and tap > DND.

  2. Toggle on DND.

  3. Toggle on Specific Time.

  4. Set the DND start time and end time. DND will be activated automatically during the designated period and deactivated outside these hours.

  5. Specifies the number of times the DND schedule will be repeated. The default setting is 1 time.

Protect your HyPanel Plus  

For better security, use screen lock or settings lock to prevent unintended access to your device or the settings screen.

System lock

Set up system lock

  1. Swipe down from the top edge of any screen to open Control Center, and tap > System Lock.

  2. Do any of the following:

  • Toggle on Screen Lock to set a pattern password to unlock the screen when you wake it, and follow the onscreen instructions.

  • Toggle on Setting Lock to prevent unwanted access to the Settings screen, and follow the onscreen instructions.

screen (2)

NOTE:

The Screen Lock and Setting Lock use the same password. When both are active, you only need to input the password once to unlock both the device and the Settings screen.

To change the pattern password, on this System Lock screen, tap Set Screen Lock Password, draw the current pattern, and then set a new password.

Forgot password

To clear the forgotten current password, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.

IMG_256

  • Via reset email

    If you’ve registered the administrator account and ensure that the devices are connected to the Internet, a password reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to clear the password.

screen (2)

  • On the user web portal

    Visit the user web portal, find the specific HyPanel Plus, and click > Reset > Reset Panel screen lock password.

Installer Settings screen lock

To prevent unauthorized changes, the Installer Settings screen is password-protected by default. This screen includes functions such as KNX Programming, Discovery Settings, Room Number, Network Priority Setting, Bluetooth, and more.

To access the Installer Settings screen:

  1. Swipe down from the top edge of any screen to open the Control Center, then go to > System Settings > Installer Settings.

  2. Enter the default password 123456.

_data_code_DOWNLOAD_screen - 2026-02-25T135637.103

TIP:

After accessing the Installer Settings screen, you can disable the lock if needed. Scroll down and toggle Installer Settings Lock off.

_data_code_DOWNLOAD_screen - 2026-02-25T135720.130

You can enable the Dropdown Menu Lock to prevent access to the Control Center by swiping down from the top of the screen, helping to avoid unauthorized configuration changes.

To enable the lock, go to   > System Lock > Dropdown Menu Lock.

_data_code_DOWNLOAD_screen - 2026-03-30T182212.575

Configure proximity sensor settings

HyPanel Plus features a built-in proximity sensor that detects when someone approaches. For example, it can automatically wake the screen as you get near, offering a touch-free and responsive experience.

To adjust the sensor settings:

  1. Swipe down from the top edge of any screen.

  2. Tap   > Motion.

  3. Do any of the following:

  • Enable/Disable the proximity sensor.

  • Adjust the sensitivity to set the detection distance.

_data_code_DOWNLOAD_screen - 2025-06-24T183533.637