Time
The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.
Set up time on the Setting > Time interface.
Automatic Date&Time Enabled: If enabled, the device will update the time automatically via the NTP server (Network Time Protocol). Disable it if you want to set up the time manually.
Date/Time: Set the date and time for the device manually when you disable the automatic date and time service.
Time Zone: Select the specific time zone based on where the device is used. The default time zone is GMT+0:00.
Preferred Server: Enter the primary NTP server address to update the time with. The default NTP server address is 0.pool.ntp.org
Alternate Server: Enter the NTP server address for backup.
Update Interval: Set the time update interval. For example, if you set it as 3600, the device will send a request to the NTP server for the time update once every 3600 seconds.
Current Time: Display the current device time.
Language
You can switch the web language by selecting the language in the upper right corner.
The following languages are supported: English, Simplified Chinese, Spanish, Dutch, French, German, and Korean.
