Update the system
Device update requires cloud connection. Alternatively, you can contact your service provider for assistance.
To update the device to the latest version, swipe down from the top edge of any screen, and tap 
> System Settings > Update. On the Update screen, do any of the following:
To update the firmware automatically, toggle on Auto Update. You can also set a specific update time period for the device to download and install available updates.
NOTE:
To upgrade the device in the preset time, the device must meet below 2 conditions：a)The device must be in standby mode during the previous hour, and b)The device must have no alarm and countdown set for the next hour.
If Auto Update is disabled, any available update must be downloaded and installed manually with your consent. To do this , tap Update.
NOTE:
If your system already installs the latest version, the screen shows no Update button.
Restart your HyPanel Lux
To restart the device’s system, Swipe down from the top edge of any screen to open Control Center, and tap > Reboot.
Restore HyPanel Lux to installer settings
To reset your device, do as the following.
1.Swipe down from the top edge of any screen to open Control Center.
2.Tap > System Settings > Reset.
NOTE:
The reset results depend on the device’s usage mode your service provider selected in the initial setup.
Choosing the Installation Code option will reset the device to the settings that your installer set up, and remove all user data and subsequently added devices.
Selecting Auto Discovery mode will initiate a reset to factory settings, and delete all user data and devices.
Please consult with your service provider before resetting devices.