Albert is a voice assistant from Akuvox. It can help you with intercom calls, door opening, arming modes, and other functions. As for the door access control, you can choose which relay to activate by this voice assistant.
Parameter Set-up:
- Language Type: select the language according to your preference.
- RecognitionSensitivity: adjust the voice assistance recognition sensitivity among Low, Normal, and High according to your need.
- Talk Mode: move the toggle switch to the right if you want to enable the talk mode. When Talk mode is enabled, the voice assistant will stay on to receive your voice commands for 30 seconds without your needing to call Albert again to wake up the voice assistant, while if you disable it, the voice assistant will wake up again for each voice.
- Not Disturb At Night: move the toggle switch to the right to enable the function. This function is applied when you want the voice assistant to stay silent while carrying out what it is made to do according to your voice.
- Supported Command: enable or disable the voice commands according to your need.
- Answer Call Permission: enable it so that you can answer or reject the incoming call via voice assistant by replaying Yes or No.
- Call Fuzzy Match: Enable it to allow fuzzy matching of the contact's name, for example, if you have Tom and Tomy in your phonebook, then Tomy will also appear when you call Tom, and you are required to select the right contact manually.
Please see the voice command details below:
To enable the voice assistant and set the voice assistant-controlled relay on the web Device Setting > Voice Assistant interface, you can tick the check box to enable the voice assistant function. Then go to the Voice Command Setting section to elect a specific relay to be triggered via voice assistant.
Parameter Set-up:
- Unlock type: select the type of relay to be triggered by the voice assistant for the predefined action, for example, door opening.