Volume and Tone

  • Updated on Mar 3, 2025
Prev Next

Volume Control

You can control the device volume on the Device > Audio interface.

图片.png

  • Volume Level: Set the overall volume. Level 1 volume range is roughly 80-95, and 2 is 95-109.

  • Tamper Alarm Volume: Set the volume when the tamper alarm is triggered.

  • Prompt Volume: Various prompts including door-opening success and failure prompts.

IP Announcement

You can set when the device announces its IP after each reboot and the loop times.

Set it up on the Device > Audio interface.

  • Active Time After Reboot: To sound the IP address, you need to hold the Call button within the time after the device reboots. If it is set to 0, you can hold the button anytime to announce the IP after the reboot.

Door-opening Tones

You can enable or disable the door-opening tones on the Device > Audio interface.

 

  • Open Door Inside Tone: The input-triggered tone. The door-opening tone can be heard when users open doors by pressing an exit button.

  • Open Door Outside Tone: The relay-triggered tone. The door-opening tone can be heard when users open doors by the device-supported access methods except for the exit button.

Upload Tone Files

You can upload various tones to enrich users’ experience on the Device > Audio interface. Click Choose File and then Upload to import the file.

 

  • Open Door Succeeded Outside Warning: The relay-triggered tone. The door-opening tone can be heard when users open doors by the device-supported access methods except for the exit button.

  • Open Door Succeeded Inside Warning: The input-triggered tone. The door-opening tone can be heard when users open doors by pressing an exit button.

  • Open Door Failed Warning: The tone can be heard when opening doors fails.

  • Ringback: The ringback will play when someone calls the device.

  • Trigger Manager Dial Warning: The tone can be heard when the push button is pressed.

Upload the Announcement Played during Intercom Calls

The announcement will be automatically played when the called party answers the call from the door phone.

To set up this feature, go to the Intercom > Call Feature > Announcement interface.

  • Loop Times: Indicate how many times the announcement will be played.

Ringback Tone

The ringback tone setting prioritizes the playing of local ringtones and determines what kinds of previews the callee can receive.

To set it up, go to the Device > Audio > Ringback Tone Setting interface.

  • Ringback Source:

    • Remote, Local As Backup: The local ringtone will be played.

      • When the door phone calls another device, for example, an Akuvox indoor monitor, and the SIP server returns non-183, the indoor monitor will not have any intercom preview.

      • If the SIP server returns 183, the indoor monitor will receive the video preview without voice.

    • Local: The local ringtone will be played. Whether the SIP server returns 183 or not, the callee will not have any intercom preview.

    • Remote:

      • If the SIP server returns non-183, the local ringtone will be played and the callee will not have any intercom preview.

      • If the SIP server returns 183, the SIP server’s ringtone will be played and the callee will receive the video preview without voice.

  • Local Ringback Tone Loop Playback: This feature enables the local ringback tone to play repeatedly. It is enabled by default.