Volume and Tone Configuration

Volume Configuration

To set up the volumes, you can set them up on the device web Phone > Audio > Volume Control interface.

Parameters Set-up:

• Volume Level: control the volume of all speakers. The default is 1, the first level of volume, the volume range is roughly 80-95, and 2 is the second level of volume, the volume range is roughly 95-109.
• Prompt Volume: adjust the prompt volume, which includes various types of prompt sound for door open success and failure, ringback, temperature measurement sound, etc.

Open Door Tone Configuration

Go to Phone > Audio > Open Door Tone Setting interface.

Parameters Set-up:

• Open Door Inside Tone: enable it so that you can hear the open door tone when you open the door by pressing the exit button.
• Open Door Outside Tone: enable it so that you can hear the open door tone when you open the door using the access method on the door phone.
• Open Door Failed Tone: enable it so that you can hear the open door failure tone following the open door failure.

Ringback Tone Setting

You can also configure ringback tone on the Phone > Audio > Ringback Tone Setting interface.

You can hear the ringback tone whether Remote, Local As Backup or Local is selected. The differences lie in what the callee can see.

Parameter Set-up:

• Remote, Local As Backup:
  • If selected, when the door phone calls another device, for example, Akuvox indoor monitor and the SIP server returns 183, the callee will see the video preview without voice.
  • If the SIP server returns non-183, the callee will not have the intercom preview.
• Local: whether the SIP server returns 183 or not, the callee will not have the intercom preview.

Upload Tone Files

You can configure the door phone ringback tone and other tones related to the door opening.

Upload Open Door Tone

The outside tone is heard when you open the door via card, DTMF or PIN code. The inside tone is heard when you open the door via a triggered input interface. Please follow the file size and format.

On the web, navigate to Phone > Audio.

Parameter Set-up:

• Open Door Outside Tone Setting: upload the open door success tone which you can hear when you open the door using the access method on the door phone.

Parameter Set-up:

• Open Door Inside Warning: upload the open door tone when you open the door by pressing the exit button.
• Broadcast Delay: select open door tone waiting time after door opening success. For example, if you set it at 2 seconds, then the tone will go on 2 seconds after the door opens.
• Broadcast Frequency: select the number of open door tones. For example, if you select 1, then the tone will be played only once after the door opening.
• Broadcast Interval: select the time interval between every two open door tones. For example, if you select 2, then the interval between two open door tones will be two seconds. The number of open door tones should be 2 minimum if in this application.

Upload Door Failed Tone and Ringback Tone

Parameter Set-up:

• Open Door Failed Warning: upload the open door failure tone.

• Ringback: upload the ringback tone.

Upload Keypad Tone

You can upload keypad tone for each key. When pressing any key, corresponding tone can be heard so that you can distinguish the key from others.