Door phones' system settings can be either accessed on the device or on its interface.
Device Start-up Network Selection
After the device boots up initially, you are required to select the network connection for the device. You can either select Ethernet or wireless network connection.
Please refer to the chapter on Network Setting & Other Connection for the configuration of the Ethernet and wireless network connection.
Device Home Screen Type Selection
Akuvox indoor monitor supports two different home screen display modes: Call list simple and classic.
Access the Device Setting on the Device
Access Device Basic Setting
You can access the device's basic setting and advance setting where you can configure different types of functions as needed. To access the device's basic setting by pressing More > Settings.
Access Device Advanced Setting
To access the advance settings, press Settings then press More. Press password 123456 (by default) to enter the advance setting.
Access the Device Setting on the Web Interface
You can enter the device IP address in a browser and log into the device web interface where you can configure and adjust parameters.
You can also obtain the device IP address using the Akuvox IP scanner to log in to the device web interface.
-
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP -
See detailed guide:
https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20Scanner -
Google Chrome browser is strongly recommended.
-
The initial username and password are admin and please be case-sensitive to the user names and passwords entered.