Configure Weather Display on Indoor Monitors

The weather conditions can be displayed on indoor monitors’ home screens when they are connected to the SmartPlus Cloud. Users can check conveniently local temperature and weather.

The weather displayed is affected by the address that is configured on the SmartPlus platform.

Note

The following devices with specific firmware versions or higher support the feature:

• C319: 119.30.10.203;

• S567: 567.30.12.3;

• S563: 563.30.12.104;

• IT88: 88.30.12.404.

For Single-tenant Projects

1. Log into the SmartPlus Cloud platform with an installer account.

2. Switch to the single-tenant view.

3. Select the address based on which the indoor monitor can access the weather conditions when

• creating a new project by clicking New;

• modifying the existing project by clicking .

4. Click Submit to save the configuration.

For Community Projects

1. Log into the SmartPlus platform with an installer account.

2. Switch to the Community view.

3. Select the address based on which the indoor monitor can access the weather conditions when

• creating a new community by clicking +New;

• modifying the existing community by clicking .

4. Click Submit to save the configuration.

For Office Projects

1. Log into the SmartPlus platform with an installer account.

2. Switch to the multi-tenant view and select Office.

3. Select the address based on which the indoor monitor can access the weather conditions when

• creating a new office by clicking +New;

• modifying the existing office by clicking .

4. Click Submit to save the configuration.

After adding the indoor monitor to the target area, reboot the device to make the setting effective.