Device Management

Prev Next

You can manage all devices across projects under your account. This includes adding, replacing, or deleting devices in your own projects, downloading device lists, and more.

Add Third-Party Locks

The cloud platform supports integration with Lockly and iTec smart locks. Once added, these locks can be assigned to public areas or specific homes.

The following steps use Lockly as an example:

  1. Go to Integration > Lockly Lock.

  1. Click to bind the lock API.

TIP:

Click User Guide for instructions on how to obtain your API account credentials.

  1. Bind the lock to a project’s public area or a specific home.

  • Project-Wide Public Area: After selecting a project, set the Building option to Public Area. Once submitted, all residents across all buildings in that project can view and control the lock.

  • Building-Specific Public Area: Select a project and a specific building, then set the Door Number to Public Area. The lock will be bound to that building's common area, allowing only residents within that specific building to view and control it.

  • Specific Home: Select the project and building, then choose a specific Door Number. Once submitted, the lock is bound to that individual residence, and only that specific household will have access to view and control it.

Add Third-Party Cameras in Community Projects

You can add third-party cameras to public areas or building entrances in community projects. Once added, residents can view live feeds on their panels and via the BelaHome app.

  1. Go to Project > Community.

  2. Select Public Area or a Building where you want to add the camera.

  3. Click Third-Party Devices > Camera > Add.

Configuration

Description

Remark

Device Name

Name the camera.

RTSP Address

Enter the RTSP URL for the live video stream.

Follow the formats under the input field.

Username

Enter the camera’s username.

Password

Enter the camera’s password.

Does this device have internet access

Select whether the camera is connected to the internet.

  • Yes

  • No

When the camera does not have internet access, it must be on the same LAN as the home center.

Add Public Intercom Devices in Community Projects

NOTE:

Before adding a device, ensure its MAC address is added into your distributor’s MAC library on the SmartPlus Cloud.

To add public intercom devices, go to Projects > Community> Detail, then do as the following:

  • In common areas: Click Public Area > Add.

  • In a specific building: Select the desired building, then click Intercom Devices > Add .

Add Devices to Homes

You can add akubela panels and door phones when creating or editing projects.

Add akubela Panels

  1. Go to Projects > Community/Single-tenant > Detail > Layout, then click Device > Smart Home Devices > Add.

  1. Configure the device as follows:

Configuration

Description

Product Model

Must match the panel’s actual flush-mounted module, or it won’t connect to the cloud.

Product Name

Populated automatically.

Device

- Home Center: Only one per home. Central hub for all automation.

- Sub-Gateway: Supports ZigBee devices (except CT61-PoE).

Device

Enter a device name.

Location

Specify where the device is installed.

Relay

Select if applicable (not all models support this).

Add Door Phones

NOTE:

Before adding a device, ensure its MAC address is registered in your distributor’s MAC library on the SmartPlus Cloud.

  1. Go to Projects > Community/Single-tenant > Detail > Layout > Doorphone, then click Add.

  1. Configure the door phone:

Configuration

Description

Device Type

Choose single-tenant or multi-tenant.

Device MAC

Must exist in the SmartPlus Cloud MAC library.

Does this device have Internet access

  • No: Enter IP address.

  • Yes: Choose a network group (Community projects only).

Device Name

Enter a device name.

Relay Toggle

Enable/disable relay control.

Relay Name

Name the relay controlled by the door phone.

DTMF Code

Set a DTMF code for door unlocking.

Add Relay/Security Relay

Add additional relays or security relays.

Add Cameras

  1. Go to Projects > Community/Single-tenant > Detail > Layout, then click Device > Camera > Add.

  1. Configure the camera:

Configuration

Description

Remark

Device Name

Name the camera.

RTSP Address

Enter the RTSP URL for the live video stream.

Follow the formats under the input filed.

Username

Enter the camera’s username.

Password

Enter the camera’s password.

Does this device have internet access

Select whether the camera is connected to the internet.

  • Yes

  • No

When the camera does not have internet access, it must be on the same LAN as the home center.

Back Up and Replace Devices

NOTE:

Back up device data before replacement (Settings > System Settings > Cloud Backup on the panel) to retain all settings and information. If data is not backed up, replacing a device will erase all stored configuration.

TIP:

For backup specifications and detailed instructions on the replacement process, refer to the following guides:

  • Home center: See here.

  • Sub-gateway: See here.

Replace akubela Panels

NOTE:

  • For devices connect to the cloud from local auto-discovery mode, if the replacement model differs from the original model registered on the cloud, the replacement will succeed, but backup data cannot be restored.

  • If a panel is replaced with a new device, all associated add-ons must be re-added manually.

  • If the panel is not yet installed:

    Delete the old device via Project > Community/Single-tenant > Detail > Layout > Device, then add the new one.

  • If installed but in Local Mode: Replacement via the cloud is not supported.

  • If installed and connected to akubela Cloud:

  1. Replace the device:

  • Replacing home center device

NOTE:

The new device must be brand-new or factory reset and removed from the cloud.

  1. Disconnect and power off the old panel; Ensure it’s offline.

  2. Go to Project > Community/Single-tenant > Detail > Layout > Device > Smart Home Devices > Replace, and enter the new device’s MAC.

  1. Factory reset the old panel.

  2. Connect the new home center to the Internet, and complete initial setup in Local Mode.

  3. Remove the old MAC from the distributor’s MAC library.

  • Replacing a gateway device

  1. Follow the Home Center replacement steps above, or enter the existing installation code on the new (same-model) device.

  2. Remove the old MAC from the distributor’s MAC library.

  1. Restore the data:

  1. Click Backup, select the desired data version, and click Store.

  1. On the new panel, go to Settings > System Settings > Cloud Backup > Restore Backup Data.

_data_code_DOWNLOAD_screen - 2026-04-09T154129.673

Replace Door Phones

  1. Ensure the new door phone’s MAC address is added to the distributor’s MAC library on the SmartPlus Cloud, and that the old MAC address has been removed.

  2. On the akubela Cloud, go to Project > Community/Single-tenant > Detail > Layout > Device > Doorphones, and click Edit.

  1. Modify the MAC and other settings.

Replace Cameras

Go to Project > Single-tenant > Detail > Layout > Camera > Edit, and change the settings.

Delete Devices

Delete akubela Panels

  • If panels are not installed

    Go to Project > Community/Single-tenant > Detail > Layout > Device, and click Delete.

  • If installed but in Local Mode

  • Home center: Cannot be deleted.

  • Gateways: Via BelaHome app, the device portal, or the user portal.

  • If installed and connected to akubela Cloud

  • Home center: Cannot be deleted.

  • Gateways:

  1. Go to Project > Community/Single-tenant > Detail > Layout> Device, find the desired gateway device, and click Delete.

  2. Remove its MAC from the distributor’s MAC library.

Delete Door Phones

  1. On the akubela Cloud:

    Go to Project > Community/Single-tenant > Detail > Layout > Doorphone > Delete.

  1. On the SmartPlus Cloud

    Remove the device’s MAC address from the distributor’s MAC library.


Delete Cameras

Go to Project > Single-tenant > Detail > Layout > Camera > Delete.

Obtain Installation Codes

If you plan to connect akubela panels to the cloud during initial setup using Cloud Installation mode, you’ll need each panel’s unique installation code.

NOTE:

Installation codes are available only after a home center device is added to the home layout. If the layout contains only sub-devices, installation codes will not be shown.

Community Projects

You can view and export installation codes for the entire project or for individual homes.

  • To obtain installation codes for a community project:

    • Go to Project > Community > Detail > Export Installation Code > Export Installation Code to download the file directly; or

    • Go to Project > Community > Detail > Export Installation Code, enter a valid email address, and send the file to it.

  • To obtain installation codes for a specific home:

    Go to Project > Community> Detail > Install.

You can also:

  • Click to revert to the previous codes compatible with older firmware versions.

  • Click to download an EXCEL file containing this homes’ installation codes.

Single-Tenant Projects

To obtain the installation code:

Go to Project > Single-tenant > Detail > Install.

You can also:

  • Click to download an EXCEL file containing installation codes.

  • Click to revert to the previous codes compatible with older firmware versions.

Batch Configure Devices via AutoP

Auto-Provisioning(AutoP) allows you to remotely apply batch configuration settings to cloud-connected devices within your projects. This is useful for unified adjustments such as enabling Do Not Disturb (DND) mode or hiding relay configuration options.

TIP:

To use this feature, contact the akubela technical support team to obtain the required configuration file.

  1. Go to the Project > Community/Single-tenant > Detail for the target project, and click .

  2. Upload the config. file provided by the akubela tech support.

  3. (Community projects only) Select the building and the room.

  4. Select the product model.

  5. Choose the devices to apply the configuration to.

  6. Click Submit.

View Device List

After adding devices, you can go to Devices > Device List to view all akubela devices under your accounts.

You can use filters to locate specific devices.

To see a device’s details including MAC address, SIP number, firmware version, belonged project, network information, and more, click Info.

Download Device List

You can download a customized list of devices:

  1. Go to Device > Device List, then click Download.

  1. Select the information you want.

  2. Choose to download only the current page or the entire list.