Device Start-up Network Selection
Après le démarrage initial de l’appareil, vous devez sélectionner la connexion réseau de l’appareil. Vous pouvez choisir soit la connexion Ethernet ou la connexion réseau sans fil.
Note
Please refer to the chapter on Network Setting & Other Connection for the configuration of the Ethernet and wireless network connection.
Access Device Basic Settings
You can access the device's basic and advanced settings where you can configure different types of functions.
To access the device's basic settings, swipe your finger left on the home screen, then tap the Setting icon
. You can check the basic information like MAC, firmware, etc.
Access Device Advance Settings
To access the advanced settings, press Settings and then tap Advance. Enter the default password 123456.
.png "screenshots - 2024-09-18T103857.878(1).png")
Access the Device Web Settings
You can also enter the device IP address on the web browser to log into the device web interface where you can configure parameters.
You can check the IP address on the device Settings > System Info > Network screen. You can also search the device by IP scanner, which can search all the devices on the same LAN
Note
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IPSee the detailed guide:
https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20ScannerGoogle Chrome browser is strongly recommended.
The initial username and password are admin and please be case-sensitive to the user names and passwords entered.