Akuvox IT88 Series Indoor Monitor Administrator Guide

Thank you for choosing the Akuvox IT88 series indoor monitor. This manual is intended for the administrators who need to properly configure the indoor monitor. This manual applies to the 88.30.10.4 version, and it provides all the configurations...

IT88 series is an Android SIP-based indoor monitor with a smooth touch-screen. It can be connected with the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video call,...

Add High Security Mode .

Status : This section gives you basic information such as product information, Network Information, and account information, etc. Account : This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio&v...

Akuvox indoor monitor system settings can be either accessed on the device directly or on the device web interface. Device Start-up Network Selection After the device boots up initially, you are required to select the network connection for the ...

Language Setting Set up the language during initial device setup or later through the device or web interface according to your preference. When you first set up the device, you might need to set the language to your need or you can do it ...

The door phone allows you to enjoy a variety of screen displays to enrich your visual and operational experience through customized settings to your preference. Screen Display Setting on the Device You can configure a variety of feature...

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. Volume Configuration You can configure the Mic volume according to your...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Configure Device Network Connection on the Device To check and configur...

Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device Contacts > Local Contacts directly. Add Contact Parameter Set-up : Account1 : sele...

IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls To make a direct IP call ...

Call Auto-answer Configuration IT88 will auto answer all incoming calls if call auto-answer is enabled and receive a live stream if live stream is enabled. To do the configuration on web Account > Advanced > Call > Auto Answer and Device > Call...

You can check, create and clear messages as needed on the indoor monitor Messages screen. Click Add to create a new text message and Clear to delete the existing messages. Parameter Set-up : Notification : the message from the...

Audio Codec Configuration The device supports eight types of codec (iLBC_13_3, iLBC_15_2, OPUS, L16, PCMU, PCMA, G729, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality....

Monitor Setting You can add up to four video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. Parameter Set-up : Monitor Disp...

Relay Switch Setting Local Relay Setting A local relay is an external unit that is physically nearby and directly connected to the intercom device. It allows the intercom system to trigger actions, such as unlocking a door, based on user inpu...

Door Unlock by DTMF Code Dual-tone multi-frequency signaling( DTMF ) is a way of sending signals over phone lines by using different voice-frequency bands. Users can use the DTMF function to unlock the door for visitors during a call by either ...

You can summon lift at home via the lift control feature. Configure Lift Control To enable and set the display status Lift icon on device web Device > Lift> Lift Control interface. Parameter Set-up : Icon : click to select icon for ...

Akuvox devices can be upgraded on the device web interface. Go to Upgrade > Basic interface. Note: Firmware files should be .zip format for the upgrade.

You can import or export encrypted configuration files to your Local PC. Go to Upgrade > Advanced > Others interface if needed.

Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox devices to access the URL of the address of the ...

Albert is a voice assistant from Akuvox. It can help you with intercom calls, door opening, arming modes, and other functions. As for the door access control, you can choose which relay to activate by this voice assistant. To configure the v...

If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period, you can check and search the call log on the device web interface and export the call log from the device if needed. Nav...

System Log for Debugging System logs can be used for debugging purposes. You can set up the function on the web Upgrade > Diagnosis > System Log interface. Parameter Set-up : Log Level : select log levels from 0 to 7 levels. Y...

Enter Applications Screen The content of this part mainly teaches you how to enter the APK interface through hidden operations. To do the configuration on device Settings > System Info interface. You can press on User Mode 10 times an...

The indoor monitor has a built-in PBX server which allows the device to serve as an intercom monitor and a SIP PBX, so users do not bother to prepare an extra SIP PBX again. The PBX supports call forward, transfer, conference, ring group features...

Modify Device Basic Setting Password To do the configuration on device Settings > Advanced Settings > Protected Code screen to choose System Code to change a new password. The default password is 123456 . Modify Device Advanced Setting P...

Reboot Reboot on the Device If you want to reboot the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To restart the system on device Settings > Advance Settings > R...