Language
You can set up the device web language on the device web Setting > Time/Lang > Web Language interface.
The device supports the following web languages:
English, Russian, Portuguese, Spanish, Italian, Dutch, French, German, Turkish, and Korean.
Mode: English is the default web language.
Time
The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.
Set it up on the Setting > Time/Lang > NTP interface.
Time Zone: Select the specific time zone based on where the device is used. The default time zone is GMT+0:00.
Preferred Server: Enter the primary NTP server address for updating the time. The default NTP server address is 0.pool.ntp.org.
Alternate Server: Enter the backup NTP server address when the primary one fails.
Update Interval: Set the time update interval. For example, if you set it as 3600 seconds, the device will send a request to the NTP server for the time update every 3600 seconds.
System Time: Display the current device time.
You can also set up the time manually. Select Manual, and enter the date and time.
