The Project interface allows you to manage all projects, including viewing community project details, creating single-tenant projects, and managing layout templates.
View Projects and Details
Select Community or Single-tenant to view a list of all projects of that type along with key summary data.

To view comprehensive information such as home units, linked devices, and associated end users, click the Detail button.
Layout: Click to view a home’s floor plan, devices, and configuration settings.
Install: Click to export installation codes required for cloud connection.

Create Single-Tenant Projects
You can create single-tenant projects either individually or in batches.
Only installers can create community projects.
Create an Individual Project
Go to Project > Single-tenant > Add > New Projects.

Enter the required information. Ensure the address is accurate to enable devices to access precise weather data.

Click Detail > Add New Home to add a home to the project.


Enter the home details and configure the settings as needed. Click Submit.

Configuration | Description |
Home Name | Name the home |
Layout Template | Optional. Apply a template or customize the layout later. |
Home Center MAC |
|
SIP Call or IP Call | Optional. Call method between HyPanel and door phones:
|
Add Administrator | Add the family’s administrator account.
|
Create Multiple Projects in Batch
This feature is mainly used for Kit packages but also supports fast creation of non-Kit projects.
Go to Project > Single-tenant > Add > Batch create Kit package projects.
Click Download the Template. Fill in the MAC addresses of the Home Center devices for each Kit package and save the file.


Click Add Projects by batch to upload the completed template.
Projects will be created automatically and listed under Single-tenant.

A home will be automatically added to each project.
TIP:
Each home’s MAC address is already registered in the cloud. Once devices connect to the Internet, they will automatically connect to the cloud.


Delete Your Projects
You can only delete projects that you created.
To delete a project:
After deletion, all akubela panels in the project will be removed from the cloud and restored to factory settings.
NOTE:
If the deleted project includes intercom devices, remember to remove their MAC addresses from your MAC library on the SmartPlus Cloud.

Manage Layout Templates
A layout template includes floor plan, devices, SOS settings and zone settings. It can be applied to multiple homes in both community and single-tenant projects to streamline setup.
Create a Layout Template
You can create a layout exclusive to a specific home, and universal templates for homes with the same floor plan and devices
For a specific home: Go to Project > Single-tenant > Detail > Layout.

For a universal template: Go to Project > Single-tenant > Layout > Add.


Configure the Layout Template
Edit or add rooms/floors, then click Submit.

Stay on the same page and add akubela panels. For detailed instructions, see here.
NOTE:
Door phones cannot be added to universal templates. To add door phones to a project, see here.

NOTE:
This section applies to wired sensor settings and is available only on specific panel models included in the current layout.
Go to Projects > Single-tenant > Detail > Layout > Zone > Edit.

Configure the following settings:

Configuration | Description |
Zone Name | Name the zone. |
Status | Enable/Disable the zone function. |
Location | Specify the sensor’s location. |
Type | Select the sensor type. |
Trigger Mode | Select the sensor contact state when voltage is off:
|
NOTE:
SOS settings can also be configured via the user web portal.

Go to Projects > Single-tenant > Detail > Layout > SOS > Edit.
Click
in the desired number type field, and enter the SIP number.

In the SOS Call Settings section, check the boxes for the required number types. These numbers will then be synchronized with the devices.

Specify the number of call attempts for the selected SOS contacts.

Select the outgoing call account:

Account 1: Typically the cloud account; available once cloud-connected. The SIP number is displayed on the panel’s Connect Status and About screens.
Account 2: Used for third-party SIP accounts configured via the device web interface. The account number will only appear on the device’s About screen.
Auto: The system automatically selects the optimal available account.
Save as Layout Template
If you have completed the home and device settings for a specific home without applying a template, you can save its layout as a template for future use.
To save it:

Apply Layout Template to Projects
Community project: Go to Projects > Layout Template > Apply, then select the desired project and the homes.

Single-tenant project: Go to Projects > Single-tenant > Detail > Edit > Layout Template.

Delete or Edit Layout Templates
Modifying a layout template applied in a project will not change the original template. And changes to a template apply only to homes where installation is not completed.
For a specific home: Go to Projects > Single-tenant > Detail > Layout.

NOTE:
After installation, the home’s template can only be modified via the BelaHome app (Go to Me > Family Management > Space Management) or via HyPanel devices(Pro/Ultra/Supreme).
For a universal template: Go to Projects > Layout Template, then click Info to edit it, or click Delete to remove it.
