Volume and Tone Configuration

Volume Configuration

Navigate to the web Phone > Audio > Volume Control interface.

Parameter Set-up:

• Volume Level : controls the volume of all speakers. The default is 1, the first level of volume, the volume range is roughly 80-95, and 2 is the second level of volume, the volume range is roughly 95-109.
• Prompt Volume: includes various types of prompt sound for door open success and failure, ringback, etc.

IP Announcement

Navigate to the web Phone > Audio > IP announcement interface.

Parameter Set-up:

• Active Time After Reboot: the IP announcement time after the device reboot. If you set it as 30 seconds, then you must press the call button within 30 seconds for the IP announcement after the device is rebooted, otherwise, the IP announcement will expire. If you set it as 0 seconds, then you can press the call button any time after the reboot for the IP announcement.

Open Door Tone Configuration

You can control the prompt words that accompanies the tone on the web Phone > Audio > Open Door Tone Setting interface.

Parameter Set-up:

• Open Door Inside Tone: allows users to hear the open door tone when they open the door by pressing the exit button.
• Open Door Outside Tone: allows users to hear the open door tone when they open the door using the access methods supported by the door phone.

Keypad Tone Setting

Parameter Set-up:

• Keypad Tones: select Beep and you can hear the beep sound when pressing on the keypad. If you select Digital Sounds, you can hear the announcement of corresponding numberic keys when pressing on the keypad.

Upload Tone Files

Upload Ringback Tone

Navigate to the web Phone > Audio > Tone Upload interface.

Upload Open Door Tone

The outside tone is heard when users open doors via card or DTMF. The inside tone is heard when users open doors via triggered input interface. Please follow the prompt about the file size and format.

Navigate to the web Phone > Audio > Tone Upload interface.

Parameter Set-up:

• Open Door Succeeded Outside Warning: warning tone that will go off when users open the door by pressing the exit button.

• Open Door Succeeded Inside Warning: warning tone that will go off when they open the door using the access methods supported by the door phone.

• Trigger Manager Dial Warning: warning tone that will go off when users press the push button to make group call or sequence call.