Device Start-up Network Selection
After the device boots up initially, you are required to select the network connection for the device. You can select either an Ethernet or a wireless network connection.
Note
Please refer to Network Setting & Other Connection for the configuration of the Ethernet and wireless network connection.
Access the Device’s Settings
Access Device Basic Settings
You can access the device's basic settings and advanced settings, where you can configure different types of functions as needed. To access the device's basic settings, tap Settings on the right menu. You can check the basic information like MAC, firmware, etc.
Access Device Advance Settings
To access the advanced settings, tap Settings > Advance. Press the default password 123456 to enter the advanced settings.
Access the Device’s Web Settings
You can also enter the device's IP address in a web browser to access its web interface, where you can configure and adjust parameters, etc.
To check the IP address, go to the device Settings > System Info > Network screen. Or, search the device by IP scanner, which can search all the devices on the same LAN.
Note
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP
See detailed guide:
Google Chrome browser is strongly recommended.
The initial username and password are admin and please be case-sensitive to the user names and passwords entered.
Your computer should be on the same network as the device.