Before Getting Started

Prev Next
  1. Project Setup Requirements: All projects, smart home panels, and intercom devices must be added to the akubela Cloud and complete the installation process. This is required to enable GRMS features such as room check-in and card issuance.

  2. Panel Compatibility:

    Ensure your smart home panels are GRMS-compatible and running the required firmware versions.

Compatible Device

Required Firmware Version

Serve as Home Center in GRMS Project

Serve as Gateway in GRMS Project

HyPanel 

51.1.36.417 or later

√

√

HyPanel (V2)

251.1.36.408 or later

√

√

HyPanel Plus 

52.1.36.407 or later

√

√

HyPanel KeyPlus 

53.1.36.412 or later

√

√

HyPanel Pro

71.1.38.431 or later

√

√

HyPanel Ultra

281.1.38.421 or later

√

√

HyPanel Supreme

1001.1.38.418 or later

√

√

SmartPanel

933.1.38.415 or later

√

√

SmartPanel Elite 10

119.1.38.414 or later

√

√

  1. QR Code (H5 Control) Requirements

    To enable QR code display on panels for H5 interface control, update devices to the following versions:

Compatible Device

Required Firmware Version

HyPanel 

51.1.39.127 or later

HyPanel (V2)

251.1.39.108 or later

HyPanel Plus 

52.1.39.109 or later

HyPanel KeyPlus 

53.1.39.110 or later

HyPanel Pro

71.1.39.126 or later

HyPanel Ultra

281.1.39.121 or later

HyPanel Supreme

1001.1.39.118 or later

HyPanel Elite 10

159.1.39.146 or later

SmartPanel

933.1.39.103 or later

SmartPanel Elite 10

119.1.39.104 or later

  1. Additional Device Requirements

    For projects using the following devices, ensure they meet the required firmware versions.

Compatible Device

Required Firmware Version

Supported Functions

Switch Actuator (R8)

2.0.0.2 or later

Device display and control

IP-485 Multifunctional Gateway (R10)

10.1.0.42 or later

Device display and control

C6 Smart Lock

V4 or later

Device display and control, RF card issuance, PIN issuance

F2 Smart Lock

V16 or later

Device display and control, PIN issuance