Screen Display

Home Screen Display

The device supports Villa, Building, Office, and Alphanumeric themes. You can apply the desired theme to different scenarios.

Select the theme on the Setting > Key/Display > Theme interface.

Villa Theme

You can configure the screen display for the layout of the Tenant icon, PIN icon, and Call icon on the home screen in Villa mode.

Set it up on the Setting > Key/Display > View Control of The Villa Theme interface.

• Default Page: Select the homepage display type.

  • Home Page: The default display with three vertical round icons, Contact, PIN, and Call.

  • Call: Display the Dial screen as the homepage.

  • Tenants: Display the Contact screen as the homepage.

  • PIN: Display the PIN screen as the homepage.

Note

If you switch from Building mode to Villa mode and your previous home screen was set to Home Page, the three round icons for Tenants, PIN, and Call will be displayed. However, if your previous display type was Call, Tenants, or PIN, only the corresponding highlighted icons will appear at the top of the home screen instead of the three round icons for the Homepage.

• Key: Select the key to be displayed from Tenants, PIN, and Call.

• Label: Name the key. The name will not change the attribute of the key.

• Value: Display the key or not.

Speed Dial in Villa Theme

Set it up on the Setting > Key/Display > Display Mode of Call Interface (Speed Dial) interface.

You can import and export speed dial numbers for quick setup.

Scroll to the Picture/File Import section. The supported maximum file size is 20KB.

Building Theme

You can set up the key display in the Building theme on the Setting > Key/Display > Key In Homepage Of The Building Theme interface.

• Default Page: Select the homepage display type.

  • Home Page: The default displays PIN, Call, Directory, and Reception tabs and the facial recognition box.

  • PIN: Display the PIN entry screen.

  • Tenants: Display the directory screen.

  • Call: Display the dial screen.

  • Temp Key: Display the temp key entry and the QR code scanning screen.

• Label: Name the key. The name will not change the attribute of the key.

• Value: It is available for those features that need to be set up with numbers, such as Speed Dial.

• Type: Select the key type.

  • When Relay is selected, you can specify which relay to open and apply a schedule within which the relay remains activated.

Language Setting Of The Building Theme

You can set up the language display in the Building theme on the Setting > Key/Display > Language Setting of The Building Theme interface.

• Visible: When disabled, the language options will be hidden on the home screen.

• Language 1-4: You can select four languages to be displayed on the home screen.

Facial Recognition Display

You can turn on or off the facial recognition scanning box in the Building theme.

Set it up on the Setting > Key/Display > Facial Recognition Setting interface.

Alphanumeric Theme

The Alphanumeric Theme is used in the apartment with the room number that carries both the English alphabet and numbers.

Set it up on the Setting > Key/Display > Display Setting interface.

• Wall Mode: Enable this to set the device as a peripheral. In this mode, visitors can only tap the Speed Dial tab (Concierge), Temp Key tab (QR code), and PIN tab on the home screen (with dial pad). They cannot make calls by entering tower, floor, or flat information.

• Show Homepage: Enable this to display a poster. This allows visitors to see a poster(screen) before accessing the home screen.

• Face Recognition: Enable or disable facial recognition.

• Name: Create prompts for the following screens: Home page, Choose Tower or Concierge, Choose Floor, Enter PIN, and Scan QR Code.

• Default Keypad: Choose between a numerical keypad or an alphabetical keypad for the Tower and Flat input.

• Name: Change the names for the Concierge, QR Code, and PIN icons if needed.

• Type: Select the function of the tab.

• Alphabet Keypad: Select the alphabetical letters you want displayed on the keypad.

• Number Keypad: Choose the numbers and letters to be displayed on the digital keypad.

• Enabled Items: Choose to show or hide the following tabs on the screen: Tower, Floor, and Flat.

• Flat Length: Select a maximum length for flats: 1 or less, 2 or less, 3 or less, and 4 or less.

• Tower Length: Select a maximum length for towers: 1 or less, 2 or less, 3 or less, and 4 or less.

Office Theme

You can set up the key display in the Office theme on the Setting > Key/Display > Key In Homepage Of The Office Theme interface.

• Label: Name the key. The name will not change the attribute of the key.

• Value: It is available for those features that need to be set up with numbers, such as Speed Dial.

• Type: Select the key type.

  • The Search key allows for searching for groups and directories.

  • The Face key allows for displaying the facial recognition box.

  • The Verify key allows users to use a combination of 2 access methods for door access. You need to enable the use of two-factor authentication mode on the Access Control > Relay interface before using the key.

    

  • When Relay is selected, you can specify which relay to open and apply a schedule within which the relay remains activated.

    

Reception Setting in the Office Theme

You can add up to 100 companies to display on the home screen. Visitors can tap the company name to call its personnel.

Set this feature up on the Setting > Key/Display > Reception interface.

• Click +Add to add a company.

• Click Import to upload a TGZ file with a maximum of 250MB.

• Click Export to download the XML or CSV file(the company information) and logo pictures compressed in the TGZ file.

• Company: The company name. A maximum of 63 characters.

• Number: The IP or SIP number to be called. Support a maximum of 30 numbers. Separate multiple numbers with “;”.

• Logo: Format: .jpg/.png. Max picture size: 2MB. Recommended resolution: 300*130.

Time and Location Display in the Office Theme

You can set whether to display time and device location on the home screen.

Set it up on the Setting > Key/Display > Display of Home Page interface.

• Time Visible: If disabled, time will not be displayed on the home screen.

• Location Visible: If disabled, the location will not be displayed on the home screen.

Speed Dial Setting in Building/Villa/Office Theme

The Speed Dial feature allows users to make speedy calls by pressing the Speed Dial tab(Reception) without entering any numbers.

To set it up, go to the Setting > Key/Display > Speed Dial Setting interface.

• Speed Dial(Cloud): Display the speed dial number(s) updated from the SmartPlus Cloud that cannot be changed.

• Group:

  • Disabled:

    • When the device is connected to the Cloud, Disabled means the call will be made to other devices and the SmartPlus App based on where it is installed.

    • When the device is deployed locally, the call will be made to the number you fill in the value field of the Speed Dial(Reception) key.

  • [Cloud Group Name]: The call will be made to all contacts in the group. The Cloud group name is the APT name.

• Dial Out Forward: When enabled, all calls will be made to the same target number when pressing the Reception button.

  • Mode: When Dial Out Forward is enabled, configure the schedule when the feature is working. You can also select Auto Disable and decide after how many hours the feature will be turned off.

Speed Dial Action in Building/Office Theme

You can set up the reception tab in the Building or Office theme, with which users can make a call and open the door.

Set it up on the Setting > Key/Display > Speed Dial Action In Building/Office Theme interface.

• Account: Select the account to make the call. It applies to the registered account. If both accounts are registered, Account1 is used when Default is selected.

• Open Relay: Select the relay to be triggered along with the call.

• Action to Execute: Set the action to be triggered with the call. When triggered, the HTTP message can be captured and displayed in the corresponding packets. To utilize this feature, enable the HTTP server and enter the message content in the designated box below.

  • HTTP URL: Enter the HTTP URL to perform certain actions. The format of sending the message is http://HTTP server’s IP/Message content.

Dial Key Order

Set it up on the Setting > Key/Display > Keypad Display Mode Of PIN Interface.

Dial Screen Prompt Display

You can set up the prompt displayed on the Dial and Calling screens on the Setting > Key/Display > Prompt of The Call Page interface.

• Text Prompt: The default prompt is “Please enter the apartment number(e.g., 101). You can customize it with a maximum of 128 characters.

• Prompt During Calling: The default prompt is “Calling”. You can customize it with a maximum of 63 characters.

Screensaver Settings

On the Web

Set up screensaver on the web Device > LCD > Standby Interface Display interface.

• Screensaver Mode:

  • None: The screen will stay on without going into screen-saver mode.

  • Blank: The screen will go dark.

  • Image: The picture uploaded will be shown as the screen saver.

• Screensaver Time (Sec): Set the screen saver start time from 5 seconds up to 180 seconds. The screen saver starts when the device detects no operation or when no one is approaching.

• Deep Sleep Enabled: The screen will turn off after the screensaver reaches the end of the duration as predefined.

• Deep Sleep Interval (Min): Set the screensaver time duration before the screen turns off.

• Wake Up Screensaver Mode:

  • IR Detection: Wake up the screen by IR detection. It offers a longer range and better detection in poor visibility conditions.

  • Video Detection: Wake up the screen by video-based motion detection. Focus on analyzing visual information captured through cameras.  

  • Manual: Touch and wake up the screen.

• Schedule: Select the schedule when the screensaver settings will be effective.

Note

Wake Up Screensaver Mode cannot be changed from Auto to Manual when the Screensaver Mode is set as Blank screen.

On the Device

You can also configure the screensaver on Setting > Basic Settings> Lock Screen screen.

Upload Screensaver

Set it up on the web Device > LCD > Upload Screensaver interface.

• Use Video Screensaver: Check to upload videos as the screensaver.

  • The video screensaver takes effect only when the screensaver mode is Image.

  • The device only supports playing videos without sound.

  • If it is disabled, the photo screensaver will be used.

• Status: If the video is uploaded, it will display the file name.

• Upload: Max File Size: 100 MB, Format: .mp4/.avi/.3gp.

Note

• The pictures uploaded should be in JPG format with 2M pixels maximum.

• The recommend resolution is 800×1280.

• The previous picture with a specific ID order will be overwritten when picture with the same ID is uploaded.

Upload Device Booting Image

Set it up on the web Setting > Key/Display interface.

Note

• The pictures uploaded should be in .png or .zip format.

• Max .zip file size: 20MB; Max picture size: 1MB; Max resolution: 800*1280.

Upload Icon Pictures in the Building Theme

You can upload pictures of different icons.

Set it up on the web Setting > Key/Display > Appearance interface.

Note

• The pictures uploaded should be in .png format.

• Max picture size: 1MB; Max resolution: 120*120.

Upload Icon Pictures in the Villa Theme

You can upload pictures of different icons.

Set it up on the Setting > Key/Display > Picture/File Import interface.

Note

Max picture Size: 1MB, Recommend Resolution: 120*120.

Upload Icon Pictures in the Office Theme

You can upload pictures of different icons.

Set it up on the Setting > Key/Display > Appearance interface.

• Verify Icon: This icon is available when two-factor authentication is enabled on the Access Control > Relay interface.

  By tapping this icon, users will be guided to use their credentials in sequence.

  

Upload Background Pictures

You can upload a background picture that works for all or specific screens. If you use the appearance function, the Upload Background setting will be hidden.

Set it up on the Setting > Key/Display > Upload Background interface.

• Override Button with Custom Background: If enabled, the custom background will override the button’s default background.

• Import Background For All Pages: This picture works for all screens and covers all themes. Pictures uploaded for other screens will be covered by the background picture.

Note

Max Size: 1M, Format: .jpg/png, Max Resolution: 800*1280.

Open Door Text Prompt

Set it up on the web Access Control > Relay > Open Door Text Prompt interface.

• Open Door Outside Succeeded Text Prompt: Display a text prompt after the door is opened by the device-supported access methods except for the exit button. The default prompt is “Access Granted”. You can customize the prompt with a maximum of 63 characters.

• Open Door Inside Succeeded Text Prompt: Display a text prompt after the door is opened by pressing an exit button(the input is triggered). The default prompt is “Access Granted”. You can customize the prompt with a maximum of 63 characters.

• Open Door Failed Text Prompt: Display a text prompt after opening the door fails. The default prompt is “Access Denied”. You can customize the prompt with a maximum of 63 characters.

• Close Door Text Prompt Enable: The door-closing text prompt works for the relay(s) set to the Bistable mode. When users close the door with their credentials, the prompt will be displayed on the device’s screen.

• Close Door Failed Text Prompt: The default is Access Granted. You can customize it with up to 63 characters.

• Display User Info: Display the user information after facial recognition or RF card swiping. For example, if facial recognition succeeds, the text prompt “Access Granted” with the user ID and name will pop up on the device screen. If it fails, the text prompt “Access Denied” will be displayed with “Stranger, Name: Unknown”.

Unlock Options Display

To enable this feature, go to Access Control > Relay > Unlock Options interface. It is disabled by default.

Font and Background Color

You can change the device font and background color in the Villa theme on the Setting > Key/Display > UI interface.

Appearance

In the Building theme, the device offers various appearance options, catering to different aesthetic needs and festival atmospheres.

Change the appearance on the Setting > Key/Display > Appearance interface.

• Mode:

  • Theme: The default option. When selected, you can check the desired appearance option.

  • Customization: When selected, you can upload icon pictures for desired tabs, such as PIN, Call, and Tenants.

• Resident Theme: Select the desired appearance.

• Auto Activation: Null by default. Select the desired festival appearance(s). The device will automatically switch to the appearance during the festival.