Do Not Disturb
The Do Not Disturb(DND) feature prevents unwanted incoming SIP calls, ensuring uninterrupted focus. It also allows you to set a code to be sent to the SIP server when rejecting a call.
To configure DND, navigate to the web Device > Call Feature interface.
Account: The account to apply the DND feature.
Return Code When DND: Specify the code sent to the caller via the SIP server when rejecting an incoming call in DND mode.
DND On Code: The code used to turn on DND in the SIP server.
DND Off Code: The code used to turn off DND in the SIP server.
Maximum Call Duration
The door phone allows you to set up the call time duration in receiving the call from the calling device as the caller side might forget to hang up the intercom device. When the call time duration is reached, the door phone will terminate the call automatically.
To configure call time duration, navigate to the web Intercom > Basic interface.
Max Call Time: Specify the maximum duration of all calls. The door phone will end the call automatically when the time limit is reached.
Maximum Dial Duration
Maximum Dial Duration is the time limit for incoming- and/or outgoing calls on the door phone. If configured, the door phone will automatically terminate the call if no one answers the call within the preset time, whether it is incoming or outgoing.
To configure maximum dial duration, navigate to the web Intercom > Basic interface.
Dial In Time: Specify the maximum duration of an incoming call. The door phone will automatically end the incoming call if it is not answered within the preset time.
Dial Out Time: Specify the maximum duration of an outgoing call. The door phone will automatically end the call it dialed out if there is no answer from the recipient within the preset time.
Auto-answer Configuration
Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the communication mode between audio and video.
To enable auto-answer for SIP calls, navigate to the web Intercom > Call Feature interface.
To enable auto-answer for IP calls, navigate to the web Device > Call Feature > Others interface.
Auto Answer Delay: Set the time interval for the call to be automatically picked up after ringing. For example, if you set the delay time to 5 seconds, the door phone will answer the call automatically after 5 seconds.
Auto Answer Mode: Determine whether to auto-answer the call as a video or audio call.
Hang Up After Opening the Door
This feature automatically ends the call once the door is released, allowing for the seamless reception of subsequent calls.
To configure it, navigate to the web Intercom > Basic interface.
Type: Specify the door unlock method. If this specific method is used to release the door during a call, the door phone will end the call when the preset hang-up time is reached.
Time Out: Specify the hang-up time limit. The door phone will automatically terminate the call when the specific time is reached after the door is opened.
Group Call
This feature allows users to call a group of contacts by a single press. The device supports local and SmartPlus-featured group calls. To learn about the detailed configuration, please click here.
To configure the group call, navigate to the web Intercom > Basic interface.
Call Type: Group Call or Sequence Call.
When Refused:
Call Next: The device will continue to call other numbers.
Do Not Call Next: The device will stop calling.
Template Enabled: When the call schedule feature is enabled, group call is unavailable.
Group Call Number: If you fill in the local group call number, the local group number will be called instead of the SmartPlus group call number.
Sequence Call
Sequence Call is a feature that allows you to dial a group of numbers in a predefined order until one of them answers. This feature is supported by Akuvox SmartPlus, which provides a set of sequence call numbers for the application. Please click here for the detailed configuration.
To configure the sequence call, navigate to the web Intercom > Basic interface.
Call Type: Group Call or Sequence Call.
Time Out(Sec): Set the call timeout before calling the next called party when the first called party does not receive the call within the timeout.
When Refused:
Do Not Call Next: The device will stop calling.
Call Next: The device will continue to call other numbers.
Template Enabled: When the call schedule feature is enabled, sequence call is unavailable.
Push Button Action
You can set actions triggered by pressing the push button on the Intercom > Basic interface.
Action to Execute: Set the desired actions that occur when pressing the push button.
FTP: Send a message to the preconfigured FTP address.
Email: Send a message to the preconfigured Email address.
HTTP URL: When triggered, the HTTP message can be captured and displayed in the corresponding packets. To utilize this feature, enable the HTTP server and enter the message content in the designated box below.
HTTP URL: Enter the HTTP message if selecting HTTP as the action to execute. The format is http://HTTP server’s IP/Message content.
Relay ID: Specify the relay to be unlocked.
How To Reset The Relay: Specify when the relay is reset.
Hang Up After Connecting: The relay will be reset when the call is ended.
Line Connected: The relay will be reset when the call is picked up.
Push to Hang Up
Users can hang up the call on the door phone by pressing the push button. To enable the feature, navigate to Intercom > Basic > Push To Hang Up interface.
Hold Time: Within the hold time, the call will not be hung up when users press the push button.
Multicast
Multicast is a one-to-many communication within a range. The door phone can act as a listener and receive audio from the broadcasting source.
To configure multicast, navigate to Device > Multicast interface.
Paging Barge: Multicast or how many multicast calls have higher priority than SIP call, if you disable Paging Priority, SIP call will have higher priority.
Paging Priority Active: Multicast calls are called in order of priority or not.
Listening Address: The multicast IP address to be listened to. The multicast IP address needs to be the same as the listened part and the multicast port cannot be the same for each IP address. Multicast IP address is from 224.0.0.0 to 239.255.255.255.
Web Call
The web call feature allows for making calls via the device’s web interface, commonly used for remote call testing purposes.
To set it up, go to the Intercom > Basic > Web Call. Select the registered SIP account, enter the IP/SIP number, and click Dial Out to make the call.
Call Schedule
This feature allows you to create templates that define call numbers and schedules, then assign them to specific input ports. By pressing external buttons at designated times, users can initiate calls to different numbers.
Set it up on the Intercom > Call Schedule interface.
Template Name: Name the template. You can add up to 10 templates.
Call Number: Enter the target called IP or SIP numbers. Each template can contain 16 numbers at a maximum.
Enabled Schedules: Select the desired schedule on the left box and move it to the right. For instructions on creating schedules, please refer to Access Control Schedule Management chapter.
Reset: Click to clear entered data.
Add: Click to save the template.
After adding a template, you can check it for modification or deletion.
Note
Click here to view instructions on assigning templates to inputs.