Akuvox S567 Series Indoor Monitor Administrator Guide

Prev Next
  • Updated on Nov 2, 2026
  • Published on Apr 13, 2026
Thank you for choosing the Akuvox S567 series indoor monitor. This manual is intended for administrators who need to properly configure the indoor monitor. This manual is written based on firmware version 567.30.114.504, and it provides all the...
  • Updated on Mar 14, 2024
The S567 series is an Android SIP-based indoor monitor with a smooth touch-screen. It can be connected to the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video calls...
  • Updated on Nov 2, 2026
  • Published on Apr 13, 2026
What’s new in version 567.30.115.233: The following new features require the device’s connection to the SmartPlus Cloud: Support integration with akubela SL60 . Support integration with the MR03 sensor . What’s new in version 567.30.1...
  • Updated on Aug 6, 2026
  • Published on Apr 21, 2026
Click here to download the device’s datasheet.
  • Updated on Mar 14, 2024
Status : This section gives you basic information such as product information, network information, account information, etc. Account : This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio & vide...
  • Updated on Mar 14, 2024
The indicator light is on the right side of the device, showing the different status of the device. See the indicator light status below:
  • Updated on Apr 18, 2025
Akuvox indoor monitor system settings can be either accessed on the device or its web interface. Device Start-up Network Selection After the device boots up initially, you are required to select the network connection for the device. You can eit...
  • Updated on Nov 2, 2026
  • Published on Apr 13, 2026
Language Set up the language during initial device setup or later through the device or web interface according to your preference. On the Device To select the desired language, go to Settings> Time & Language . The device supports t...
  • Updated on Apr 18, 2025
Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. On the Device Set up the volumes on the device Settings > Sound screen. ...
  • Published on Nov 2, 2026
On the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. Navigate to the device Settings > Display screen. Brightness : Move the blue bar to adjust the scree...
  • Updated on Jul 10, 2026
  • Published on Jul 10, 2026
Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. On the Device Check and configure the network connection on the device Settin...
  • Updated on Apr 18, 2025
The local contact information is used to initiate SIP or IP calls to other intercom devices. You can group the contact information to facilitate group calls. Moreover, you can add the camera URL of the target device, allowing users to view its live...
  • Updated on Apr 18, 2025
IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls Make a direct IP call on the device Call ...
  • Updated on Sep 3, 2026
  • Published on Sep 19, 2023
The indoor monitor has a built-in PBX server which allows the device to serve as an intercom monitor and a SIP PBX, so users do not bother to prepare an extra SIP PBX again. The PBX supports call forward, transfer, conference, ring group features, ...
  • Updated on Apr 22, 2025
Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the communica...
  • Updated on Apr 22, 2025
To check calls—including dial-out, received, and missed calls—within a specific period, you can view the call log on the device's web interface. If needed, you can also export the call log from the device. To set it up, go to&...
  • Updated on Apr 22, 2025
Manage Messages You can check, create and clear messages as needed on the device Messages  screen. Tap +Add to create a message and tap Clear to delete messages. The device can store up to 1,000 messages. Notification : The mess...
  • Updated on Apr 22, 2025
Audio Codec Configuration The indoor monitor supports eight types of codecs for encoding and decoding the audio data during the call session. Each type of codec varies in terms of sound quality. Higher bandwidth means the device can capture more de...
  • Published on May 7, 2026
Local Relay A local relay is the relay output built into the intercom device. It can directly control connected devices, such as door locks, by triggering actions based on user input or authorization. To set it up, go to the web Devic...
  • Published on Apr 2, 2025
The device can scan other intercom devices on the same LAN. You can redirect to their web interfaces for configuration. Set it up on the Device > Remote Control interface. IP Address : The IP address of the device to be accessed remot...
  • Published on Jul 27, 2026
Monitor and Image Monitor Setting You can add video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. To set it up, go to&nbs...
  • Updated on Apr 22, 2025
Residents can summon and send the lift by simply tapping on the Akuvox indoor monitor. To achieve this function, you need to set up the lift control feature on both the indoor monitor and the lift controller EC33. Click here to view the configu...
  • Updated on Nov 18, 2025
The Bela Assistant is a smart voice assistant responsive to commands. Users can ask Bela to make calls, answer calls, open doors, etc. This feature requires the device to be connected to the SmartPlus Cloud. Click here to view the feature details...
  • Updated on Nov 2, 2026
  • Published on Nov 2, 2026
Install Third-party App To check the used/total storage of the device and install the third-party app, go to the web Device > Third Party APK interface. Upload the APK file from the PC. If you want to clear the APK file uploaded...
  • Updated on Dec 9, 2024
Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS  are the protocols used by the Akuvox devices to access the URL of the address of th...
  • Updated on Feb 3, 2026
Akuvox devices can be upgraded on the device web interface. To upgrade the device, navigate to the Upgrade > Basic interface. Note Firmware files should be . zip format for the upgrade. Click here to download the lates...
  • Updated on Dec 9, 2024
You can import or export encrypted configuration files to your Local PC. To export the file, navigate to the Upgrade > Advanced > Others interface. The export file is in the TGZ file. The import file should be in TGZ, CONF, or CFG f...
  • Updated on Apr 22, 2025
System Log for Debugging System logs can be used for debugging purposes. If you want to export the system log to a local PC or a remote server for debugging, you can set up the function on the web Upgrade > Diagnosis > System Log interfa...
  • Updated on Dec 9, 2024
Modify Device Basic Setting Password Settings Code is used to unlock the screen. The default is 123456. To modify it, go to the Settings > Advance Settings > Protect Code screen and select Settings Code . Modify Device Advance Setti...
  • Updated on Apr 22, 2025
Reboot You can reboot the device on its Settings > Advance > Reset&Reboot screen. Or, go to the Upgrade > Basic interface. Besides, you can set up a reboot schedule to make the device restart at designated times. Set it up on&...