Akuvox R25A Door Phone Administrator Guide
- 28 Articles
- Updated on Sep 28, 2026
- Published on Mar 26, 2026
Thank you for choosing the Akuvox R25A door phone. This manual is intended for administrators who need to properly configure the door phone. This manual applies to 25.30.11.3 and provides all the configurations for the functions and features of ...
- Updated on Sep 5, 2024
Akuvox R25A door phone can be connected to indoor monitors for remote access control and communication. They allow audio calls with visitors, as well as opening the door. Featuring good video quality and wide view angle, it fits well in residen...
- Updated on Sep 28, 2026
- Published on Apr 2, 2025
What’s new in version 25.30.11.3: Support for the Apple Wallet Unlock method . Support for integration with Akuvox IP cameras(VC50T/VC50B) . Support for the Event Trigger Rule feature . Support for the Emergency Scenario feature . ...
- Updated on Sep 15, 2026
- Published on May 21, 2026
Supported Card Types The device’s firmware should be 25.30.10.123 or higher: Unencrypted ID Card: EM4100 EM4200 Unencrypted IC Card: Mifare Ultralight C/EV1 Mifare Classic Compatible Card Mifare Plus-S 2K Mifare Desfir...
- Updated on Jun 19, 2025
Obtain Device IP Address Check the device IP address by holding the push button for 5s. Or, search the device IP by the IP scanner in the same network. Access the Device Web Settings You can enter the device IP address in a browser and log i...
- Updated on Sep 5, 2024
Status : This section gives you basic information such as product information, network information, account information, etc. Intercom : This section covers intercom settings, relay, monitoring settings, etc. Account : This section concer...
- Published on Mar 26, 2026
Language Select the device’s web language on the Phone > Time/Lang interface. The following languages are supported: English, Simplified Chinese, Traditional Chinese, Russian, Spanish, Italian, Dutch, French, German, Polish, Japanese, and...
- Updated on Sep 14, 2026
- Published on Mar 26, 2026
Volume Control You can control the device volume on the Phone > Audio interface. Volume Level : Set the overall volume. Level 1 volume range is roughly 80-95, and 2 is 95-109. Tamper Alarm Volume : Set the volume when the tamper a...
- Updated on May 8, 2025
LED Fill Light LED fill light is mainly designed to reinforce the light at night or in a dark environment. To set it up, navigate to the Intercom > LED Setting > LED Fill Light interface. Mode : Auto : Turn on the LED light a...
- Updated on Jul 8, 2025
Network Status Check the network status on the web Status > Basic > Network Information interface. Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained aut...
- Updated on Jun 19, 2025
IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Enable or disable the direct IP call function on the Pho...
- Updated on Jun 19, 2025
Do Not Disturb The Do Not Disturb( DND ) feature prevents unwanted incoming SIP calls, ensuring uninterrupted focus. It also allows you to set a code to be sent to the SIP server when rejecting a call. To set it up, go to the Phone > Call Fe...
- Updated on Jun 19, 2025
Audio Codec The door phone supports three types of codecs (PCMU, PCMA, and G722) for encoding and decoding the audio data during the call session. Each codec varies in terms of sound quality. PCMU and PCMA are well-suited for traditional telephony ...
- Updated on Sep 28, 2025
The local contact information is used to initiate SIP or IP calls to users. Moreover, the contact list functions as a whitelist, allowing only listed numbers to open doors via DTMF during calls. The door phone can store up to 1,000 contacts. You ca...
- Updated on Sep 28, 2025
Local Relay A local relay is the relay output built into the intercom device. It can directly control connected devices, such as door locks, by triggering actions based on user input or authorization. You can configure the relay switch(es) and D...
- Published on Jun 22, 2026
A door access schedule lets you decide who can open the door and when. It applies to both individuals and groups, ensuring that users within the schedule can only open the door using the authorized method during designated time periods. Create a ...
- Published on Jun 22, 2026
Unlock by RF Cards The RF card should be assigned to a particular user for door opening. When adding a user, you can also customize settings such as defining the door access schedule to determine when the code is valid and specifying which relay t...
- Published on Nov 5, 2026
MJPEG and RTSP are the primary monitoring stream types discussed in this chapter. MJPEG, or Motion JPEG, is a video compression format that uses JPEG images for each video frame. Akuvox devices display live streams on the web interface and c...
- Updated on Jun 19, 2025
Tamper Alarm The tamper alarm function prevents anyone from removing the device without permission. Akuvox devices support two types of tamper proof: gravity detection and button status detection. Click here to view which type is supported by t...
- Updated on Sep 28, 2025
Call Logs To check calls—including dial-out, received, and missed calls—within a specific period, you can view the call log on the device's web interface. If needed, you can also export the call log from the device. Check the call logs on the P...
- Updated on Jan 23, 2026
Integration via Wiegand The Wiegand feature enables the Akuvox device to act as a controller or a card reader. Set it up on the Intercom > Wiegand interface. Wiegand Display Mode : Select the Wiegand card code format from the provi...
- Updated on Sep 28, 2025
The device can be connected to the Akuvox lift controller for the lift control. Users can summon the lift to go down to the ground floor when they are granted access through various types of access methods on the device. Click here to watch a de...
- Updated on Jun 19, 2025
Akuvox devices can be upgraded on the device web interface. Upgrade the device on the Upgrade > Basic interface. Click Choose File to upload the firmware. Note The upgrade file should be in .rom format. Click here to downloa...
- Published on Oct 16, 2026
Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, and FTP are the protocols used by the Akuvox devices to access the URL of the address of the third-pa...
- Updated on Jun 19, 2025
System Log System logs can be used for debugging purposes. Set the system log on the Upgrade > Advanced > System Log interface. Log Level: Select log levels from 0 to 7 levels. You will be instructed by Akuvox technical sta...
- Published on Jun 17, 2026
You can import or export encrypted configuration files to your Local PC. Export the file on the Upgrade > Advanced > Others interface. The imported file should be in the .tgz/.conf/.cfg format. Config File : Click Export to e...
- Updated on Sep 5, 2024
You can modify the device web password for both the administrator account and the user account. To set it up, go to Security > Basic > Web Password Modify interface. Click Change Password . To enable or disable the user account, s...
- Updated on Jun 19, 2025
Reboot If you want to restart the device system, you can operate it on the device web. Moreover, you can set up a schedule for the device to be restarted. Reboot the device on the Upgrade > Basic interface. To set up the schedule, go to t...