Akuvox X916 Series Door Phone Administrator Guide_V1.0

Thank you for choosing Akuvox X916 series door phone. This manual is intended for the administrators who need to properly configure the door phone. This manual applies to 916.30.10.2 version and above, and it provides all the configurations for the ...

X916 series is an Android-based IP video door phone with a large size LCD touch screen. It incorporates audio and video communications, access control and video surveillance. Its finely-tuned Android OS allows for feature customization to better s...

Add High Security Mode .

Status : this section gives you basic information such as product information, network Information, and account information etc. Intercom : this section covers intercom call, LED & LCD setting, relay, input control, live stream, RTSP, ONVIF, m...

Door phones' system settings can be either accessed on the device directly or on the device web interface. Access the Device Setting on the Device You can set up some basic settings on device screen by pressing 9999 + Dial key + 3888 ...

Language Setting Set up the language during initial device setup or later through the device or web interface according to your preference. Language Setting on the Device To configure the language display on the device Settings > Langua...

Infrared LED Setting Infrared LED is mainly designed to reinforce the light for facial recognition at night or in a dark environment, you can configure the infrared LED in the device and on the web interface. Infrared LED Setting on the De...

The door phone allows you to enjoy a variety of screen displays to enrich your visual and operational experience through customized settings to your preference. Screensaver Configuration Configure Screensaver on the Device Standby Mode i...

Volume and tone configuration include microphone volume, the AD volume, keypad volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user experience. ...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. To configure it on the device Setting > Address screen. Paramete...

IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls To make SIP calls or IP calls on th...

Call Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the c...

Audio Codec Configuration The door phone supports three types of Codec (PCMU, PCMA, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality. You can select the specific codec ...

Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device directly. To configure the phone book on the device Setting > Tenants screen. Parameter S...

Relay Switch Setting You can configure the relay switch(es) and DTMF for the door access on the web Intercom > Relay interface. Parameter Set-up : Trigger Delay (Sec) : set the relay trigger delay timing (Ranging from 1-10 Sec.) For ...

Configure PIN Code for Door Unlock There are two types of PIN codes for door access: public and private. A private PIN is unique to each user, while the public one is shared by residents in the same building or complex. You can create and modif...

MJPEG and RTSP are the primary monitoring stream types discussed in this chapter. MJPEG, or Motion JPEG, is a video compression format that uses JPEG images for each video frame. Akuvox door phones display live streams on the web interface and ...

Tamper Alarm Setting The tamper alarm function prevents anyone from removing the devices without permission. It does this by setting off the tamper alarm and making calls to a designated location when the device detects a change in its gravity val...

Call Logs If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period of time, you can check and search the call log on the device web interface and export the call log from the device...

System Log for Debugging System logs can be used for debugging purposes. Go to Upgrade > Advanced > System Log interface. Parameter Set-up : Log Level : select log levels from 1 to 7 levels. You will be instructed by Akuvox t...

Akuvox devices can be upgraded on the device web interface. Go to Upgrade > Basic interface. Note: Firmware files should be .zip format for upgrade.

You can import or export encrypted configuration files to your Local PC. Go to Upgrade > Advanced > Others interface if needed.

Configurations and upgrading on the device can be done on the web interface via one-time auto-provisioning and scheduled auto-provisioning via configuration files, thus saving you from setting up configurations needed one by one manually on the a...

Integration via Wiegand The Wiegand feature enables Akuvox door phone to act as a controller or a card reader. To configure it on the web Intercom > Advanced > Wiegand interface. Parameter Set-up : Wiegand Type : set the Wiega...

Modify Device Web Interface Password To modify web interface password, you can do it on device web interface. Select Admin for the administrator account and User for the User Account. Click the Change Password tab to change the password...

Reboot Reboot on the Web Interface If you want to reboot the device system, you can operate it on the device web interface as well. Moreover, you can set up a schedule for the device to be restarted. To restart the system setting on the ...