Unlock

Add Users on Door Phone Web Interface You can add a single user or multiple users in batch on the door phone web interface. In this procedure, you can set up user's ID and name and door access methods. In this part, take R29 for ...

This guide is only applicable to door phones X912, R27, and R28 Series. Take X912 for example. Note For other door phones, card adding is contained in the steps of adding users. Please refer to the article Unlock Door to see the steps of ad...

DTMF feature allows users to open doors by tapping the DTMF-related Unlock button or entering the DTMF code on the indoor monitor’s keypad during a call. All Akuvox intercom devices support the door opening via DTMF. In this article, we take the d...

Generally, Akuvox door phones support both IC and ID cards. Identification(ID) cards only record the card number and cannot write data, working in 125KHz frequency. Integrated Circuit(IC) cards have writable memory, and the recorded content can be...

With NFC-featured mobile phones, users can open doors contactlessly and conveniently. Note ONLY Android mobile phones support the NFC door-opening feature. What You Should Know 1. The NFC feature works with the SmartPlus Cloud. Make sure the d...

Mifare cards are encryption-featured cards. They are less easy to decipher and copy than regular RF cards, thus enhancing access control security. The following device models support using Mifare cards: S539, X916, X915, X912, R29, R28, R27, R20 S...

HTTP command enables users to open doors remotely by tapping unlock buttons on Akuvox indoor monitors' talking, call previewing, and monitoring screens. All Akuvox intercom devices support this feature. In this article, we take the door phone R29 a...

Two-factor authentication requires users to open doors by two access methods, thus enhancing access control security. When this mode is enabled, users cannot use voice assistant to open doors. The configuration routes may vary by model. In thi...

The Wiegand feature enables Akuvox door phone to act as a controller or a card reader. After wiring the door phone with a third-party device via Wiegand ports, you need to configure Wiegand on the door phone's web interface. Tip ...

WebRelay is an electrical relay with a built-in web server. It is controlled remotely by HTTP command, enhancing security for access control. In this article, we take R20A as an example. Configure WebRelay on Door Phones Log into the device's w...

WebRelay is an electrical relay with a built-in web server. It is controlled remotely by HTTP command, enhancing security for access control. In this article, we take IT88 as an example. Steps Log into the device's web interface with the use...

When the intercom devices are added to the SmartPlus Cloud, you can set up the unlock buttons on the indoor monitor to trigger relays using Config On Cloud. Note Ensure that the status of your devices are green, meaning they are online. St...

Through the SmartPlus App or SmartPlus Cloud platform, property managers and end users can issue temporary keys to visitors and couriers for door opening. The time-limited temp keys can enhance access security. Note The temp key for couriers is a...

The following device models support opening the door via Bluetooth: S539, R29C, X916, X915 V1/V2, X916, E12 V1/V2, E16C, E18C, A05, and A08.

Akuvox A08 and A03 access control terminals support opening the door via the Bluetooth-enabled My MobileKey App. Users can open the door conveniently with their mobile phones in their pockets when they pass by the device. To realize the door-openin...

Property managers can use the admin card to add or delete users’ cards directly on the device instead of logging into the device’s web interface. Note Admin Card is ONLY used to register the user card. It cannot open the door. The following de...

R29, E16 V2.0, and X915 support selecting relay(s) to be triggered when they are connected to more than one door lock. Note The models with specific firmware versions support this feature: R29 29.30.3.3 and above; E16 V2.0 216.30.10.36 an...

R29C-T supports opening the door via fingerprint. The finger key works when assigned to a user. The fingerprint can be recorded on the device’s web interface or the device screen. On the Web Interface Log into the device’s web interface with th...